Furniture Protector
Produced with nanotechnology is a sustainable product for the protection of furniture made of hard materials, such as plastic, wicker, SensoTex, aluminium, glass and durable top. The SUNS Lifestyle Shine Furniture Protector provides a long-term and active protection of the material, it restores the appearance and ensures deeper colour intensity through an active nano protection layer. Thanks to the dirt-resistant and antistatic properties, the treated surfaces become self-cleaning.
This comes in a 500ml Bottle.
Instructions:
Shake well before use! Apply only outdoors or in a well-ventilated area. Apply the protector on a clean surface. Use SUNS Furniture Cleaner for cleaning. Spray small amounts over the surface. Rub immediately with a clean microfiber cloth. Do not treat more than 1 m2 at a time i.v.m. optimum processing. If desired, rub for an accelerated response. The product responds completely within 8 hours and works for a long time. Processing temperature between 10 – 30 ° C.
Textile Protector
Produced with nanotechnology is an effective and durable impregnating agent that has been specially developed for protecting water-repellent cushions, parasols, tent cloths etc., both indoors and outdoors. The nano-protective layer binds with the fibres, is vapour-permeable, retains colour fastness and protects against weather influences, liquids, oil and grease. The SUNS Lifestyle Textile Protector is suitable for plastic, cotton and other textile types.
This comes in a 500ml Bottle.
Instructions
Shake well before use! Apply only outdoors or in a well-ventilated area. Moisten the surface with water. Apply Protector undiluted. Spray evenly from top to bottom at a distance of 15-20 cm from the product until pearls form. Allow Protector to dry for 6-12 hours (at 18-20 ° C) before use. Full response after 24 hours. Active effect for approx. 1 year, if not exposed to frequent washing, scrubbing or dry cleaning. If the stimulating effect decreases, repeat the treatment. After treatment, food stains can easily be removed with a damp microfibre cloth (swipe, not rub). In the event of strong contamination, clean the material with Suns Lifestyle Shine Textile Cleaner. Re-impregnate the cleaned part with Textile Protector if required.
Wood Protector
It is a transparent solvent for protecting all unpainted and un-oiled soft and hardwoods, both indoors and outdoors. The SUNS Lifestyle Wood Protector with durable nano protection creates an invisible, well-adhesive, UV-filtering and vapour-permeable layer that protects the wood against water, oil, mosses, algae and fungi and thus preserves the natural appearance of the wood. For teak, pre-treat with Suns Lifestyle Shine Wood Cleaner to obtain good impregnation.
Instructions
Shake well before use! Apply only outdoors or in a well-ventilated area. Make the surface dry, clean and free of grease. Use the SUNS Lifestyle Wood Cleaner for quick and effective cleaning of wood. Do not process below 5 ° C.
Apply the product undiluted and spread evenly with a soft brush or brush. The product may foam slightly. Application is also possible with a spray gun (0.8 mm), do not spray. Avoid drops and wipe immediately. Apply 2x for optimum protection.
Allow the first coat to dry for approx. 1 hour before applying a new coat. Drying time a few hours depending on temperature and substrate. The product has fully reacted within approx. 24 hours. Do not load the surface with water or oil during this time.
Wood & Stone Protector
Manufactured with nanotechnology is a self-cleaning impregnating agent that prevents slippery surfaces on wooden and stone terraces. It is water and oil repellent protects against UV light, has an active long-lasting effect and is fully vapour-permeable. The SUNS Lifestyle Stone & Wood Protector is suitable for all types of stone and wood, porous natural stone, brick and concrete and protects against algae, fungus and other water-sensitive parasites for a long time.
This comes in a 1 Litre Bottle.
Instructions:
Shake well before use. Use only outside. First, remove the worst dirt residues from the surface. When in doubt about the effect on the substrate, it is wise to first apply a small amount to test the product.
Apply the protector undiluted and evenly with a brush or spray (spraying). Also works on a damp and slightly soiled surface, as long as the surface is not very wet. The impregnation is a one-layer system: after drying, a water-repellent layer is created. Applying a second layer has no effect. Immediately remove droplets or too much-applied liquid to prevent shine and stains. Allow drying for 20-30 minutes. Protector responds completely within 24 hours. Do not load with water or oil during drying time.